52 lines
2.2 KiB
Markdown
52 lines
2.2 KiB
Markdown
# EV6 Hardware Implementatie
|
|
This repository includes all files for both the experiments and the assignment for the EV6 Hardware Implementation course at HU Electrical Engineering.
|
|
|
|
## Data
|
|
Data has been collected for the two experiment using the Tektronix Oscilloscope, the files in `./data` correspond to the different setups as follows:
|
|
### Reflectieproef
|
|
| File | Description |
|
|
| --- | --- |
|
|
| T0000CH1.csv | Setup with only probe connected |
|
|
| T0001CH1.csv | Setup 3 x 50 Ohms coax cables in series unterminated |
|
|
| T0002CH1.csv | Setup 3 x 50 Ohms coax cables in series terminated 0 Ohms |
|
|
| T0003CH1.csv | Setup 3 x 50 Ohms coax cables in series terminated 50 Ohms |
|
|
| T0004CH1.csv | Setup 1 x 75 Ohms coax cable unterminated |
|
|
|
|
### Overspraakproef
|
|
| File | Exercise | End | Description |
|
|
| --- | --- | --- | --- |
|
|
| T0005CH1.csv | 4.4 | Far end | Capacitive crosstalk - **Might only contain Channel 1** |
|
|
| T0006CH1.csv| 4.4 | Far end | Capacitive crosstalk - **Might only contain Channel 1** |
|
|
| T0007ALL.csv| 4.4 | Far end | Capacitive crosstalk - **Should contain both** |
|
|
| T0008ALL.csv| 4.4 | Near end | Capacitive crosstalk |
|
|
| T0009ALL.csv| 4.5 | Far end | Inductive crosstalk |
|
|
| T00010ALL.csv| 4.5 | Near end | Inductive crosstalk |
|
|
| T00011ALL.csv| 4.5 | Far end | All crosstalk - **50 Ohm terminator** |
|
|
| T00012ALL.csv| 4.5 | Near end | All crosstalk - **50 Ohm terminator** |
|
|
| T00013ALL.csv| 4.5 | Far end | All crosstalk - **230 Ohm terminator** |
|
|
| T00014ALL.csv| 4.5 | Near end | All crosstalk - **230 Ohm terminator** |
|
|
|
|
|
|
|
|
## Documents
|
|
This repository contains two LaTeX source directories:
|
|
### `./doc/pcb`
|
|
Description of PCB design choices.
|
|
- Arne van Iterson
|
|
|
|
### `./doc/experiment`
|
|
Measurement reports for aforementioned experiments.
|
|
- Arne van Iterson
|
|
- Tom Selier
|
|
|
|
## Scripts
|
|
This repository contains scripts to assist in parsing data obtained from a Tektronix oscilloscope
|
|
|
|
### `./scripts/reflection.py`
|
|
A script containing the neccessary steps to find peaks and measure the peaks and throughs of a 1d signal.
|
|
|
|
### `./scripts/reader.py`
|
|
A module containing a class to read data from a tektronix oscilloscope.
|
|
|
|
### `./scripts/helper.py`
|
|
A module containing a function that slices array based on time. |