EV6 Hardware Implementatie

This repository includes all files for both the experiments and the assignment for the EV6 Hardware Implementation course at HU Electrical Engineering.

Data

Data has been collected for the two experiment using the Tektronix Oscilloscope, the files in ./data correspond to the different setups as follows:

Reflectieproef

File	Description
T0000CH1.csv	Setup with only probe connected
T0001CH1.csv	Setup 3 x 50 Ohms coax cables in series unterminated
T0002CH1.csv	Setup 3 x 50 Ohms coax cables in series terminated 0 Ohms
T0003CH1.csv	Setup 3 x 50 Ohms coax cables in series terminated 50 Ohms
T0004CH1.csv	Setup 1 x 75 Ohms coax cable unterminated

Overspraakproef

File	Exercise	End	Description
T0005CH1.csv	4.4	Far end	Capacitive crosstalk - Might only contain Channel 1
T0006CH1.csv	4.4	Far end	Capacitive crosstalk - Might only contain Channel 1
T0007ALL.csv	4.4	Far end	Capacitive crosstalk - Should contain both
T0008ALL.csv	4.4	Near end	Capacitive crosstalk
T0009ALL.csv	4.5	Far end	Inductive crosstalk
T00010ALL.csv	4.5	Near end	Inductive crosstalk
T00011ALL.csv	4.5	Far end	All crosstalk - 50 Ohm terminator
T00012ALL.csv	4.5	Near end	All crosstalk - 50 Ohm terminator
T00013ALL.csv	4.5	Far end	All crosstalk - 230 Ohm terminator
T00014ALL.csv	4.5	Near end	All crosstalk - 230 Ohm terminator

Documents

This repository contains two LaTeX source directories:

./doc/pcb

Description of PCB design choices.

• Arne van Iterson

./doc/experiment

Measurement reports for aforementioned experiments.

• Arne van Iterson
• Tom Selier